Installing The Door And The Glass Panels; What To Do If - Electrolux EOC5640 User Manual

Installing the door and the glass panels

A

10. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The oven does not heat
up.
2
1
B C
The appliance is deacti-
vated.
10.
Carefully lift (step 1) and remove (step
2) the glass panels one by one. Start
from the top panel.
11. Clean the glass panels with water
and soap. Dry the glass panels care-
fully.
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a deco-
rative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the top panel in
the seats correctly.
Possible cause
ENGLISH
Remedy
Activate the appliance.
23