Lenovo IdeaPad Yoga 13 Hardware Maintenance Manual page 56

Lenovo IdeaPad Yoga 13 Hardware Maintenance Manual
Figure 10. Speakers, base cover, USB board, power assembly, power board and wifi
(continued)
Remove four screws
by arrow
When installing: When attaching the USB board to the base cover, adjust the
placement of the USB port as shown , and make sure that the USB is attached to
the hole on the base cover as shown. Improper placement of the port might cause
a damage.
Remove the screw
power board in the direction shown by arrow
52
f
g
.
Step Screw (quantity)
b
M2 × 3 mm, flat-head, nylok-coated (4)
h
,unplug the rotation button board connector
Step Screw (quantity)
a
M2 × 3 mm, flat-head, nylok-coated (1)
, and then remove the USB board in the direction shown
f
h
j
i
f
f
f
g
Color Torque
Black 1.85 kgfcm
i
j .
Color Torque
Black 1.85 kgfcm
to lift the