1090 Lcd Unit - Lenovo IdeaPad Yoga 13 Hardware Maintenance Manual

Lenovo IdeaPad Yoga 13 Hardware Maintenance Manual

1090 LCD unit

For access, remove these FRUs in order:
• "1010 Keyboard" on page 33
• "1020 Keyboard bezel" on page 35
• "1030 Battery pack" on page 37
• "1040 Dummy card" on page 39
• "1050 DIMM" on page 40
• "1060 SSD Card" on page 41
• "1070 Fan assembly and Heat Sink assembly" on page 42
• "1080 System board" on page 44
Figure 9. Removal steps of LCD unit
Remove four screws
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
48
a
Step Screw (quantity)
a M2 × 3 mm, flat-head, nylok-coated (3)
M2 × 3 mm, flat-head, nylok-coated (3)
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
.
a
a
a
a
Color Torque
Black 2.0 kgfcm
Black 2.0 kgfcm