Philips 22HFL5662H Quick Start Manual page 14

Use the analog pendant control
The analog pendant or the pillow speaker provides a built-in
speaker, a volume control, and one dual purpose button that
is used to select the channels and power the TV on/ off.
TV
1. Turn on the TV by connecting it to the AC mains power
outlet.
2. Press TV on the pendant control.
If the TV is in standby mode, the TV is turned on.
»
If the TV is already turned on, the channel that is next
»
to the current channel is displayed.
3. To power off the TV, press TV on the pendant control and
continue to press it until the channel number increments
four times.
The TV powers off after the fourth channel increment.
»
Note
• Picture shown are for illustrative purposes only.
• Analog controls can exhibit a relatively slow response time
to channel commands. This is normal and not indicative of
any system problems.
SPEAKER
POWER/ CHANNEL +/-
VOLUME
Use the digital pendant control
The digital pendant or the pillow speaker provides a built-in
speaker, a volume control, and dedicated buttons to perform
different functions.
ON
OFF
CHANNEL
GUIDE
1. Turn on the TV by connecting it to the AC mains power
outlet.
2. Press POWER ON/OFF on the digital pendant control
to turn the TV on, if it is in standby mode.
3. Press one of the following:
• CHANNEL UP: To watch the channel that comes
after the current channel.
• CHANNEL DOWN: To watch the channel that
comes before the current channel.
• CLOSE CAPTION: To enable or disable close
caption.
• CHANNEL GUIDE: To display the channel guide.
• VOLUME: To increase or decrease the volume.
4. Press POWER ON/OFF to turn the TV off.
12
SPEAKER
POWER ON/ OFF
CHANNEL UP
CHANNEL
CLOSE CAPTION
CHANNEL
CHANNEL DOWN
CHANNEL GUIDE
VOLUME