Table of Contents
Advertisement
f If you press asqw to select [DEFAULT] and press the <ENTER> button, the entered name will not be registered and the default
name will be used.
f If you select [OK] without entering any characters and press the <ENTER> button, the default name will be used.
Loading the lens position
1)
Press as to select [LENS MEMORY].
2)
Press the <ENTER> button.
3)
Press as to select [LENS MEMORY LOAD].
4)
Press the <ENTER> button.
f The [LENS MEMORY LOAD] screen is displayed.
5)
Press as to select the item to load, and press the <ENTER> button.
6)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
f The lens moves automatically to the registered shift, zoom, and focus positions.
Note
f Lens memory is not guaranteed to be 100 % reproduced.
f The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary.
f Beware of shift, as errors in zoom position are particularly significant.
f When a lens is replaced, readjust and save the lens memory again.
f If a lens without zoom function is used, the lens memory of the zoom position does not operate.
f When [LENS MEMORY LOAD] is assigned to the <FUNC> button, the lens memory is loaded in order each time you press the <FUNC>
button.
Deleting a lens memory
1)
Press as to select [LENS MEMORY].
2)
Press the <ENTER> button.
3)
Press as to select [LENS MEMORY EDIT].
4)
Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5)
Press as to select [LENS MEMORY DELETE].
6)
Press the <ENTER> button.
f The [LENS MEMORY DELETE] screen is displayed.
7)
Press as to select the item to delete, and press the <ENTER> button.
8)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Changing the lens memory name
1)
Press as to select [LENS MEMORY].
2)
Press the <ENTER> button.
3)
Press as to select [LENS MEMORY EDIT].
4)
Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5)
Press as to select [LENS MEMORY NAME CHANGE].
6)
Press the <ENTER> button.
f The [LENS MEMORY NAME CHANGE] screen is displayed.
7)
Press as to select the name to change, and press the <ENTER> button.
f The [LENS MEMORY NAME INPUT] screen is displayed.
8)
Press asqw to select the text, and press the <ENTER> button to enter the text.
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
- Quick Links:
- Maintenance/Replacement
Hide quick links:
Advertisement
Table of Contents
