Handset Registration - Clarity C4220+ User Manual

HANDSET REGISTRATION

C4220+
Register
Auto Talk
TO REGISTER YOUR HANDSET AGAIN
Voice Asst
(or to register to a different C4220+
system)
1. In standby mode, press MENU.
Register
Register
2. Press DOWN arrow five times to advance
Deregister
the row reading "Phone Setup" to the top of
the screen.
Hold Base
3. Press MENU to enter the setup section. The
FIND Key
screen displays "Register" on the screen's top
For 5 Secs
row now.
4. Press MENU to enter the Registration
Then Press section.
MENU Key
5. Press MENU again to select "Register."
6. Press and hold the FIND key on the base
for 5 seconds, then press MENU key on the
Registering...
handset.
7. The handset displays "Registration Successful"
when process is completed.
Registration
Successful
TO DEREGISTER THE HANDSET
Register
1. See the six steps listed above, then press
Register
MENU to select "Deregister."
Deregister
2. Your handset will deregister from your base
as soon as you press MENU. The screen will
show "Handset X Deregistered"(again, where
HANDSET 1
Deregistered
"X" is the number of the handset registered),
then "Handset Needs Registration."
28
TROUBLESHOOTING
C4220+
The unit will not operate / no dial tone:
• Verify the AC adapter is securely plugged into the AC outlet, the
base and the telephone.
• Verify the telephone line cord is securely plugged into the wall jack
and the telephone.
• Make sure the handset battery is fully charged.
• Make sure the battery has been placed in the battery compartment
correctly. (The circular metal contacts on battery need to touch
the metal springs inside battery compartment.)
• Verify the telephone is in the correct dialing mode: Tone (touch)
or Pulse (rotary).
• Make sure you are in the usable range of the base station.
The phone does not ring when you receive a call:
• Make sure the RINGER switch on both handset and base is set to
ON.
• Verify the AC adapter is securely plugged into the AC outlet,
the base and the telephone.
• Verify the telephone line cord is securely plugged into the wall
jack and the telephone.
• Make sure you are within the usable range of the base station.
• You may have too many extensions on your line. Try unplugging
a few devices.
Noise, interference or other calls heard while using the
handset:
• Make sure you are within the usable range of the base station.
• Make sure the handset battery is fully charged.
• Try relocating the base unit to another location.
• Make sure the AC adapter is not plugged into the wall outlet with
other appliances.
E
N
G
L
I
S
H
29