Fujitsu PRIMERGY TX200 S7 Operating Manual page 55

One optional Front LAN connector (1) and two additional USB connectors (2)
are located on the front of the server
Figure 3: Front side connectors
I
If components with large power requirements (e.g. external USB hard
disk drives) are connected simultaneously, these USB connectors may
be switched off.
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, the keyboard and the mouse to the standard ports of
the server (see figure
Ê Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or to the mains socket strip of the rack.
V
CAUTION!
The rated current for the monitor is indicated on the technical data label
on the monitor or in the operating manual for the monitor.
TX200 S7
(figure
2 on page 54).
Operating Manual
Hardware installation
3):
55