Detecto 8440 Operation Manual

Detecto 8440 Operation Manual

Baby scale
Hide thumbs Also See for 8440:

Advertisement

MODEL 8440
BABY SCALE
Operation Manual
CARDINAL SCALE MFG. CO.
PO BOX 151  WEBB CITY, MO 64870
8535-M215-O1 Rev C
PH (417) 673-4631  FAX (417) 673-5001
04/12
www.detectoscale.com
Technical Support: Ph: 866-254-8261  techsupport@cardet.com

Advertisement

Table of Contents
loading

Summary of Contents for Detecto 8440

  • Page 1 MODEL 8440 BABY SCALE Operation Manual CARDINAL SCALE MFG. CO. PO BOX 151  WEBB CITY, MO 64870 8535-M215-O1 Rev C PH (417) 673-4631  FAX (417) 673-5001 04/12 www.detectoscale.com Technical Support: Ph: 866-254-8261  techsupport@cardet.com...
  • Page 2: Table Of Contents

    Nor can they assume responsibility for any damage to property or injury to persons occasioned from the procedures. Persons engaging the procedures do so entirely at their own risk. 8535-M215-O1 Rev C  8440 Operation...
  • Page 3: Introduction

    INTRODUCTION The Model 8440 Baby Scale is a 44lb (20kg) capacity digital baby scale. The scale is equipped with a collapsible baby tray for easy storage and additional features like weight memory and the ability to calculate weight differences. This manual contains information on the operation of this scale. Please read it before attempting to use the scale and keep it handy for future reference.
  • Page 4: Product Description

    Press this key to zero the scale before starting the Tare weighing operation or to zero off the weight of any item (i.e. protective paper, blanket or pad) on the scale. 8535-M215-O1 Rev C  8440 Operation...
  • Page 5: Installation

    Weighing Unit Switch The weighing unit switch (kg / lb.oz switch) is a push-button switch located on the bottom of the scale. Press the switch to change between kg and lb.oz. 8535-M215-O1 Rev C  8440 Operation...
  • Page 6: Operation

    If the current weight is lower than the saved weight, a negative value will be shown. 5. The Difference key will only operate when the scale is in the Weighing mode. 8535-M215-O1 Rev C  8440 Operation...
  • Page 7: Care And Maintenance

    Displayed when the battery is near the point it should be replaced. Displayed when the battery voltage has dropped too low for accurate Batt weighing. Remove the old battery and replace with a new battery before continuing operation. 8535-M215-O1 Rev C  8440 Operation...
  • Page 8 8535-M215-O1 Rev C  8440 Operation...

Table of Contents