Table of Contents
Advertisement
Selecting Camcorder Settings
To select your camcorder settings:
1.
From video mode, press Options (right softkey).
2.
Select Camcord.Settings and press
3.
Select an option from the following and press
Note:
Recording time varies depending on the Quality/Length setting.
Setting the Cue Sound
To select the Cue Sound:
1.
From video mode, press Options (right softkey).
2.
Select Camcord.Settings and press
3.
Select Cue Sound and press
4.
Select an option from the following and press
122
Resolution to select a file size (Good-176x144 or
Medium-128x96) for a video.
Quality/Length to select video quality from Economy-30sec.,
Normal-20sec., or Rich-15sec..
Silent Movie to select On to record without sounds. Select Off
to deactivate this feature.
Cue Sound to select a cue sound. (See "Setting the Cue Sound" below.)
Enlarged View or Original Size to switch the view size. (Only
appears when the resolution setting is Medium.)
Player Skins to select your favourite frame.
Status Bar to switch the status bar display on or off.
Default plays the default cue sound.
"Action & Cut" notifies you with the pre-recorded words.
"Ready & Stop" notifies you with the pre-recorded voice prompt.
Off makes no sound.
Record Your Own allows you to record your own voice for
a cue sound. Select Start Sound or End Sound and press
Select Record, press
(Maximum recording time is 3 seconds for each setting.) To
save the recording, press Save (right softkey).
.
.
.
, and press
to start recording.
.
.
11. Built-in Camera
.
Advertisement
Table of Contents
