Wake Time - HP LaserJet P3005 Series User Manual

Wake Time

An IT administrator can use the Wake Time screen to schedule product wakeups on a daily
basis. For example, the product can be set to wake up at 07:30, so the product has finished
initializing and calibrating and is ready to use by 08:00. The administrator only sets one wakeup
setting per day; however, each day can have a different wakeup setting. Additionally, to save
energy, the sleep delay can be set to turn the product off after a specific period of inactivity.
1
Callout Area on the screen
ENWW
2
3
EWS tabs and menus
1
Wake Time
2
Sleep Delay
3
Information or capability that the area provides
For more information, see "Navigating through the HP Embedded
Web Server" on page 5.
Select one or more days on which to use the wakeup setting, and
then set the time the product is turned on each day.
Set the amount of time the product is idle before it goes into
Sleep Mode. When the product is in Sleep Mode, it uses less
energy.
Wake Time 39