Configure Device - HP LaserJet P3005 Series User Manual

Configure Device

You can use the Configure Device screen to print product information pages and configure the
product remotely. The following illustration, table, and example procedure describe how to use
this screen.
If your product has a control-panel display, these menus are similar to the menus that are
available at your product control panel. Some of the product control-panel menus are not
available from the HP Embedded Web Server.
See the documentation that came with your product for more information about the different
menus that your product supports.
1
Callout Area on the screen Information or capability that the area provides
20 Configuring the product from the Settings screens
2
3
EWS tabs and menus For more information, see
1
Select a Menu
2
"Navigating through the HP Embedded Web
Server" on page 5.
SHOW ME HOW menu
INFORMATION menu
PAPER HANDLING
menu
CONFIGURE DEVICE
menu
DIAGNOSTICS menu
Print step-by-step instructions for
performing specific tasks on your
HP product.
Print product information pages, which
provide details about the product and its
configuration.
Set the type of media that is in each tray.
Configure the product to affect the product
behavior. For example, you can configure
product personality settings from this
menu, such as print-quality settings or
destination bins.
Print the event log, perform a paper-path
test, configure the output bin and duplexing
mode, and set the number of copies.
ENWW