Table of Contents
Advertisement
10.6
Calibration
Your OptiPrinter PRO comes from the factory pre-calibrated to print the image in the centre of
the CD. However, during the life of the printer it may be necessary to recalibrate it to ensure a
perfect image position on the CD. This tab allows you to fine-tune the position of the printed
image with the CD.
Note:
In order to set the calibration, the OptiPrinter Pro must be attached to your PC via the USB
cable. Calibration will not work if the printer is connected via the parallel port.
Click the Set Print Position button, the Calibration Screen appears (See Fig. 24).
ZZ 004 821
OptiPrinter PRO CD/DVD Inkjet Printer
- 23 -
Fig. 23
Fig. 24
Advertisement
Table of Contents
