Cd Tray Button; Section 5 Inserting A Cd Into The Optiprinter Pro; Inserting A Standard Cd/Dvd; Inserting A Cd Business Card & Mini Disc - Verity Systems OptiPrinter PRO OptiPrinter PRO CD/DVD Operating & Maintenance Manual

Photo-quality cd/dvd inkjet printer
Table of Contents

Advertisement

Caution!
Always use the Power button to turn the printer on and off. Using a power strip,
surge protector, or a wall-mounted switch to turn the printer on and off may cause
printer failure.

4.5 CD Tray Button

Pressing this button will slide the CD tray back and forth into the printer.
SECTION 5: INSERTING A CD INTO THE PRINTER
5.1 Standard (120mm) CDs & DVDs
With your OptiPrinter PRO switched on, push the CD Tray Button on the front of the printer
(see Fig.1 on the previous page) and the CD tray will slide out. Place a CD onto the tray
ensuring that the disc sits against the two pins at the front of the tray as shown below in
Fig. 2
When you send your image to printer, the CD Tray will tray slide back into the printer and
printing will commence.
5.2 CD Business Cards & Mini Discs (option)
The OptiPrinter PRO will also print directly onto inkjet printable CD Business Cards
(rectangular and saddle/hockey rink) and Mini Discs, via the special adaptors (Fig. 3),
which can be purchased separately (see your dealer for details). The adaptors come in two
parts.
1. Open the CD tray by pressing the CD tray button on the front of the printer.
2. Place Part 1 of the adaptor onto the CD tray making sure that the 2 pins on the tray
fit snugly into the corresponding holes on the adaptor part (Fig. 4).
Part 1
ZZ 004 821
Part 2
Fig. 3
- 10 -
OptiPrinter PRO CD/DVD Inkjet Printer
Position the CD so that the
edge of the CD sits against the
edge of the two
pins.
Fig. 2
Fit Part 1
onto the 2
locating
pins on
the CD
tray
Fig. 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiprinter pro

Table of Contents