Driverack Pa2 Control Application; Device Requirements - dbx DriveRack PA2 Owner's Manual

DriveRack PA2 Control Application

The DriveRack PA2 control application is available for Android
available for free and can be downloaded from www.dbxpro.com, the iTunes
The DriveRack PA2 control application can be used to perform the same functions available from the DriveRack PA2's front
panel controls, this includes: running all Wizards, changing configurations, viewing the RTA, editing system and processing
parameters, and managing presets. The DriveRack PA2 control app takes control even further by adding the ability to connect
directly to the ever-growing online tuning and preset database (internet connection required), where you can share your own
presets and tunings or download additional tunings from Crown
Note:
You can control one PA2 unit on the network at a time. The DriveRack PA2 can be controlled via one networked
control device at a time.

Device Requirements

Visit dbxpro.com for the latest information on device requirements for the DriveRack PA2 control application.
Note:
A DHCP (Dynamic Host Configuration Protocol) enabled router or switch must be used in the PA2 control
network to assign an IP address to the PA2. See 'Making Connections' on page 8 and 'Networking' on page
57 for more information on connecting and setting up a network for PA2 control.
56
® , iOS ® , Mac ® , and Windows
Store, or the Android
®
, JBL , other PA2 users, and more!
® ®
® PC devices. This application is
Market.
®
®