Using The Chopping Blade Assembly; Using The Dough Blade - Ninja BL820 Owner's Manual

USE

USING THE CHOPPING BLADE ASSEMBLY

1 Holding the Chopping Blade Assembly by the shaft,
place it onto the star-shaped post inside the bowl.
Ensure that the attachment fits on the star-shaped
post and that it is standing straight.
2 Add the ingredients and secure the bowl lid onto
the bowl. (Fig. 19)
3 Plug the power cord into the electrical outlet and
press the power toggle up ( ) to turn the power
"On".
4 Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down
on the "Start/Stop/Pulse" toggle in short intervals.
Press up on the "Start/Stop/Pulse" toggle to run
the unit continuously.
NOTE: When making dips or sauces, set the
variable speed on a low setting (1-3) and press the
"Start/Stop/Pulse" toggle up.
NOTE: Please refer to "Speed Settings & Uses"
chart for suggested uses and speeds.
5 When you have reached your desired consistency,
stop the appliance by pressing the "Start/Stop/
Pulse" toggle up and wait for the blade to stop
turning.
6 Press the power toggle ( ) down to turn the power
off.
7 To remove the lid, press the release button and
turn the lid counter-clockwise and lift the lid off.
Hold the bowl with one hand and lift the lid with
the other for best leverage. Turn the bowl counter-
clockwise and then lift off the base.
(Fig. 20, Fig. 21)
CAUTION: Use care when handling the
removable Chopping Blade Assembly. Blades
are sharp, handle with caution. Always handle
by the shaft.
Fig. 19
REMOVAL
Fig. 20 Fig. 21

USING THE DOUGH BLADE

1 Place the motor base on a clean, dry, level surface
such as a counter or table top. (Fig. 22)
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto
the star-shaped post inside the bowl. Ensure that
the attachment fits on the star-shaped post and
that it is standing straight.
4 Add the ingredients and secure the bowl lid onto
the bowl.
NOTE: For best results add dry ingredients first and
then add wet ingredients.
5 Plug the power cord into the electrical outlet and
press up on the power toggle ( ) to turn the power
"On".
6 IMPORTANT: Use only the "DOUGH/DISC" setting
when mixing dough or using either disc. Press up
on the Start/Stop/Pulse Toggle to start the unit.
7 When finished making dough, press up on the
Start/Stop/Pulse Toggle to stop the unit. Remove
the bowl from the motor base. (Fig. 20, Fig. 21)
8 Press the power toggle ( ) down to turn off the
unit.
NOTE: As a safety feature, the power light
will flash when the power toggle ( ) is pushed
upwards if the lid or bowl are not installed
correctly. Then the lid and bowl are installed
properly and the toggle ( ) is pushed up, the
power light will become solid, indicating the
unit is ready for use.
USE
Fig. 22
www.ninjakitchen.com
17