Removing And Fitting The Dust Removal Cover (Ventilation Slot Cover) - Fujitsu LIFEBOOK S760 Operating Manual

Removing and fitting the dust removal cover
(ventilation slot cover)
In order to ensure optimum cooling of the components in your notebook, you
should periodically clean the ventilation slot of the heatsink.
This will ensure the optimum functionality of the fan. The best way to clean
the cover is to use a small handheld suction cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Be sure that you do not damage the ventilation blades in the process. Do
not use any abrasives for cleaning purposes.
► Prepare for removal, see chapter
Fujitsu Technology Solutions
"Preparing to remove components", Page
1
Working with the notebook
► Press on the clip of the dust chamber
cover (1) and remove it from its
installation location (2).
► Clean the dust chamber with a dry brush.
► Insert the dust chamber cover into the slot
(1) at an angle, as shown, and make sure
that you feel it click into place.
► Complete the removal, see chapter
"Finishing component removal", Page
64.
70.
39