Dealer Preparation Check List - Bush Hog Razorback RZ 160 Operator's Manual

DEALER PREPARATION CHECK LIST

BEFORE DELIVERING MACHINE — The following check list should be completed.
r
1. Assembled completed.
r
2. Gearbox filled with oil.
r
3. All fittings lubricated.
r
4. All shields in place and in good condition.
r
5. All fasteners torqued to specifications given in Torque Chart.
r
6. All decals in place and readable. (See decal page.)
r
7. Overall condition good (i.e. paint, welds)
r
8. Operators manual has been delivered to owner and he has been instructed
on the safe and proper use of the cutter.
r
9. Purchaser or dealer elects to delete deflectors. (front belting, rear bands,
front and rear chains)
Explanation:
Deflector kits or chain shielding is standard equipment. Must be used for all
non-agricultural uses or in areas where the possibility of thrown objects could
be hazardous to persons or property.
Dealer's
Signature
Purchaser's
Signature
THIS CHECKLIST TO REMAIN IN OWNER'S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
WARRANTY REGISTRATION AND DELIVERY REPORT
It is the responsibility of the Dealer to do the following:
•
Complete the Warranty Registration and Delivery Report
•
Return the pre-addressed card copy to Bush Hog, L.L.C.
•
Retain pink copy for dealership records
RAZORBACK ROTARY CUTTERS
Use the Operator's Manual as a guide.
WARNING
4