Box Contents - RCA DTA800B1 User Manual

Box contents

The following items are included:
RCA Digital TV Converter Box
Quick Start User Manual
Guide (this booklet)
Setting up
Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the
Converter Box can be rotated as a stand for vertical installation.
Vertical installation (recommended)
Step 2: Connections
Option 1: Basic connection to TV
TV
AUDIO IN
ANTENNA
VIDEO IN L R
(Optional)
2
OUTPUT
ANTENNA IN CH3
CH4 VIDEO L AUDIO
TO TV
1
3
From antenna
Tip: Using the optional Audio/Video cable
connection provides better picture quality
in case your TV set has Audio/Video input available.
4
Bottom view
4
5 AC120V
60Hz
AC~120V
R
SMART ANTENNA IN
RF coaxial cable
+ -
+ -
2 AAA Batteries
Horizontal installation
Connect your existing antenna cable to the ANTENNA IN jack
1
of the Converter Box.
2 Connect the RF coaxial cable (supplied) from the OUTPUT TO
TV jack of the Converter Box to the ANTENNA jack of the TV
set.
3
Slide the CH3/CH4 selector on the back of the Converter Box to
the channel that is not in use in your area. The Converter Box
will send its video signal to either Channel 3 or 4 on your TV.
4
Connect the Audio/Video cables (not supplied) from the Audio
/Video OUT jacks (yellow, white, red) of the Converter Box to
the Audio/Video IN jacks on the TV set. If there are more than
two sets of Audio/Video jacks on the TV set, connect only either
INPUT1 or INPUT2 to those of your converter box.
5
Connect the AC power cable of the Converter Box to a
suitable wall outlet.
Note: You may choose to connect the RF coaxial
cable to TV, or Audio/Video cables to TV,
or both the RF coaxial cable and AV cables to TV.
Remote control
DTA800B1_IB_EN_E_V3