CBM-230/231 Service Manual
2. How to remove Top Cover
(1) Set the Printer Mechanism at head up
condition by pulling Head up Lever in
the direction of the arrow.
(2) Open the Auto Cuter unit (CBM-231)
Pull the Cuter Lock Lever in the
direction of the arrow.
(3) Unfasten the screws M3x10 (2pcs).
(4) Pull up the rear side of the Top Cover.
(interface side)
(5) Disconnect the connectors for Paper End
Holder and for Operation Panel Board.
2.1 Remove Paper End Holder from Top
Cover
(1) Unfasten the tapping screw M3 x 14.
(2) Cut the band binding cord.
(3) Remove the cord through the Top Cover.
2.2 Remove Switch Cover from Top Cover
(1) Unfasten the tapping screw M3x12.
2.3 Remove Operation Panel Board from Top
Cover
(1) Unfasten tapping screws M2.6 x 6 (2pcs).
5
CITIZEN