Table of Contents
Advertisement
APPENDIX D – Paper Quality Guidelines
General
These paper quality guidelines are general recommendations. Paper beyond these specifications may work as
well, however it should be tested before use. Paper is a material that reacts intensively to adverse temperature and
humidity conditions. The observance of proper conditions as defined below is therefore essential for trouble-free
operation of TowerFeed. Please also refer to the corresponding guidelines in the printer manual.
Paper Quality and Surface
Bond type papers and papers with slight rag content are recommended. For papers with high rag content, as well
as very light and air mail papers, feeding tests must be conducted to check for satisfactory performance before
regular use. Paper with embossed or heavy printing should be tested in TowerFeed before use, as well. Papers
with glossy or structured surface are not recommended. Individual sheets in a stack must not be damaged, warped
more than 3 mm (0. 12") at an angle of max. 20° or creased, since all these may reduce the feeding performance.
Paper Weight
The specified paperweight is 60 - 95 g / m
Tolerance
Paper must be cut to the appropriate size dimension within a tolerance of
be cut square to within a tolerance of 90° 0.1°.
Recommended Storage Environment
Temperature:
18°C - 24°C (64°F - 75°F)
Relative humidity:
40% - 60%
IU 675 / 0150
2
(16 - 24 lb.). Other paperweights must be tested before use.
20
1.0 mm ( 0.04"). The paper stack must
TM
TowerFeed
for the HP LaserJet 9000
Advertisement
Table of Contents
