Operating Instructions For Catalog #St4500 Bump Feed Trimmer - Black & Decker ST4500 Instruction Manual

The handle is shipped with the screw partially threaded in to prevent
loss.
To attach the handle:
1. Remove the screw.
2. Slide the handle onto the handle
housing as shown in figure 2.
3. Thread the screw back into the
hole and tighten securely with a
screwdriver.
• Remove the guard attachment
screw from the guard. Slip the
guard onto the trimmer housing
and lineup the screw hole in the
guard with the screw hole in the
housing (figure 3).
• Insert the guard attachment screw to
secure the guard in place as shown
in figure 4.
2
3
4
• Attach extension cord to cord
retainer as shown in
figures 5 & 6.
OPERATING INSTRUCTIONS FOR CATALOG # ST4500
BUMP FEED TRIMMER
LINE FEED
Your trimmer uses .065 in. (1.65 mm) diameter, ROUND nylon line
to cut grass and weeds quickly and easily. Cutting line will wear
faster and require more feeding if the cutting or edging is done
along sidewalks or other abrasive surfaces or heavier weeds are
being cut. As you use the trimmer, the string will get shorter due to
wear. Gently bump the unit on the ground and the line will feed.
CAUTION:
ALWAYS USE EYE PROTECTION.
5
5
6