Troubleshooting - Porter-Cable PN650 Instruction Manual

CABLE/DELTA FACTORY SERVICE CENTER. All repairs made by these
agencies are fully guaranteed against defective material and workmanship.
We cannot guarantee repairs made or attempted by anyone other than these
agencies.
Should you have any questions about your tool, feel free to write us at any
time. In any communications, please give your tool model and serial number.
WARNING: Disconnect tool from air supply before performing any
Service Procedure.
SYMPTOM
1. Air leak near top of
tool.
2. Tool Leaks air or will
not function
3. Tool does nothing or
operates sluggishly.
4. Air leak near bottom
of tool.
5. Other.
A complete line of accessories is available from your Porter-Cable •
Delta Supplier, Porter-Cable • Delta Factory Service Centers, and
Porter-Cable Authorized Service Stations. Please visit our Web Site
www.porter-cable.com
supplier.
WARNING: Since accessories other than those offered by
Cable •
Delta have not been tested with this product, use of such
accessories could be hazardous. For safest operation, only
Cable •
Delta recommended accessories should be used with this
product.

TROUBLESHOOTING

PROBLEMS
Loose screws.
Worn or damaged
o-rings or seals.
Internal valve has
shifted.
Inadequate air supply.
Inadequate lubrication.
Worn or damaged
o-rings or seals.
Loose screws.
Worn or damaged
o-rings or bumper.
ACCESSORIES
for a catalog or for the name of your nearest
11
SOLUTIONS
Tighten cap screws
Install Overhaul Kit.
If the tool is dropped after the air
pressure is removed from the tool,
the internal valve mechanism may
shift into the open position. When
connected to the compressed air
source, the tool will not operate due
to an air leak. To reset the internal
valve to the closed position,
disconnect the air supply and
sharply impact the tool cap against a
piece of wood. Connect the air
supply hose: The air pressure will
seat the valve in the close position.
Verify adequate air supply.
Put 5 or 6 drops of oil into air inlet.
Install Overhaul Kit.
Tighten cap screws
Install Overhaul Kit.
Contact a Porter-Cable
Service Facility.
Porter-
Porter-