This vacuum cleaner is intended for household use dropped into water. Return the vacuum cleaner to only and not for commercial or industrial use. a Vax Authorised Service Agent or suitably qualified person for examination, repair or PLEASE KEEP THESE INSTRUCTIONS FOR adjustment.
Page 5
V-064TB D1 10/25/05 4:14 PM Page 5 Use & Function/Filters Carpets & Hard Floors 1. Hard floors (tiles, parquet, etc): the brushes on the combination floor tool must be lowered, by pressing the top of the rocker switch (Fig.2). 2. Carpets or rugs: the brushes on the combination floor tool must be raised, by pressing the bottom of the rocker switch (Fig.3).
Page 6
V-064TB D1 10/25/05 4:14 PM Page 6 Filters/Accessories Changing & Cleaning the Post-Motor (Exhaust) Filter 1. Lift the post-motor filter cover and remove. 2. Remove the post-motor filter clean by shaking the dust off or replace with a new filter. PLEASE NOTE: The post motor filter should be replaced every 9-12 months.
Spare Parts/Troubleshooting/Tech Specification 6. Spare Parts Filter kit A (pre-motor filter, post-motor filter) Vax part number 1-1-125641-00 Filter kit B (central filter, pre-motor filter, post-motor filter) Vax part number 1-1-125642-00 To purchase Vax consumables, visit www.vax.co.uk 7. Troubleshooting PROBLEM: Vacuum cleaner won't run Cause: Power cord not firmly pushed into mains socket.
Page 8
4:14 PM Page 8 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product V-064TB is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste.