Table of Contents
Advertisement
4. Serial ATA connectors (7-pin SATA1, SATA2)
These next generation connectors support the thin Serial ATA cables
for Serial ATA hard disks. The current Serial ATA interface allows up to
150 MB/s data transfer rate, faster than the standard parallel ATA with
133 MB/s (Ultra ATA/133).
If you installed Serial ATA hard disks, you may create a RAID 0
configuration using the Intel
section "5.4 Intel RAID for Serial ATA" for information on creating a
RAID.
®
P4C800
P4C800 SATA Connectors
Important notes on Serial ATA
1. In a legacy operating system (DOS, Windows 98, Windows Me,
2. The Serial ATA RAID feature (RAID 0) is available only if you are
2-24
®
Windows NT) environment, using the Serial ATA connectors will
disable the ICHR chipset support to one of the IDE channels
(either primary or secondary channel).
using Windows XP.
RAID feature of the ICH5R chipset. See
SATA2
SATA1
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
