Table of Contents
Advertisement
Thank you for purchasing the Yamaha Matrix Processor MTX3. This manual will help you take full
advantage of the superior functionality offered by the MTX3. After you have read the manual, keep it
in a safe place for reference when needed.
Included items (please check)
• MTX3 Owner's Manual (this document)
• Power cable
• Euroblock plug (16-pin, 3.50mm pitch) (1)
• Euroblock plugs (3-pin, with tab, 5.08mm pitch) (16)
• Cable ties (16)
Getting Started
Firmware versions
Use MTX Editor to update the firmware of the MTX3 or check
the firmware version. For details on operation, refer to the MTX
Editor User's Manual.
Download the latest firmware from the "Downloads" page on
the following website.
Precautions for rackmounting
This device is guaranteed to operate at an ambient temperature
of 0 to 40 °C. If this device is mounted in an EIA rack together
with other devices, heat from the various devices may cause the
temperature inside the rack to rise, rendering this device unable
to perform to its full potential. To ensure that heat does not
accumulate inside this device, please ensure that the following
conditions are met when rack-mounting it.
• If you plan to mount this device together with devices that
tend to generate heat, such as power amps other than XMV
series products, allow 1U or more of vacant space between
this device and other devices. Also attach ventilation panels
in this space or leave them open to ensure sufficient ventila-
tion.
• Leave the back of the rack open, and allow at least 10 cm of
space between the rack and the wall or ceiling to ensure suf-
ficient ventilation. If the back of the rack cannot be left open,
provide forced air cooling for the rack, for example by
installing a commercially available fan kit. If you install a
fan kit, leaving the back of the rack closed may provide more
effective cooling. For details, refer to the owner's manual
provided with the rack or fan kit.
http://www.yamahaproaudio.com/
MTX3 Owner's Manual
7
Advertisement
Table of Contents
