Table of Contents
Advertisement
PT-EP06_EN.Book Page 7 Monday, September 26, 2011 5:01 PM
Using the accesories
Installing and removing of the LCD hood
Installation
Fit the LCD hood as shown in the figure into the rails above and below the LCD monitor window one after
the other.
Removal
Remove the LCD hood from the rails above and below the LCD monitor window one after the other by
widening the LCD hood.
Mounting and removing the body cap
Install to fit the concave and convex parts of the body cap and lens port. Be sure to remove the body cap
before shooting.
EN 7
Rails
Installation
Removal
Advertisement
Table of Contents
