Table of Contents
Advertisement
If the category or manufacturer is not displayed, allow your tablet device to learn the remote control signal
then register it.
Two or more devices may be displayed depending on the category or manufacturer. If more than one device
is displayed, test the remote control operation with each of remote control displayed and select the one that
works correctly.
To register as a remote control for another device
Tap
(Back), and then tap [
Learning the remote control signal and registering it
If the category or manufacturer of the device is not displayed at [Easy registration], register the remote control as
follows.
1. Start the Remote control app.
2. Tap [
Register device] or [Register device].
3. Tap [Learn from a remote control].
4. Select the category.
A remote control image is displayed on the screen.
5. Tap the button you want to assign the signal to.
6. When the menu screen is displayed, tap [Learn remote command].
7. Bring the remote control to be registered close to the IR data port of your tablet device, tap [Start], and
press the button to be learned on the remote control.
When the button is registered, the screen returns to the remote control display.
Hint
To learn more buttons, repeat steps 4 to 7.
Related Topic
Using "Small Apps"
Programming Operations in the Remote Control (Macro Function)
Register device] on the device list screen.
Advertisement
Table of Contents
