Hardware Installation - Encore ENM232-8CMI User Manual

Hardware Installation

NOTE: Before you start the hardware installation,
make sure that Windows Operating System is
properly installed to your computer.
Follow these steps carefully
1. Turn off your computer and disconnect the PC
power cord
2. Remove the case cover of your computer. Refer
to your PC's user manual for more details.
3. Insert the Sound Card into any free 32-bit
expansion PCI slot and make sure it is properly
screwed in and secured.
4. Put the computer PC case cover back on and
reconnect the PC power cord
5. Turn on your computer, and then follow the
Driver Installation to complete.
Page 5