Programming Your Telephone
9.3 Storing Speed Dial Numbers
To store an outside number as a speed dial number, follow the
display prompts and proceed as follows:
•
lift handset and press TALK (if necessary),
•
press intercom button (if necessary),
dial SS1,
•
•
press function button or dialpad button to choose storage
location,
•
press line button to select dial-out line,
–or–
•
dial 0 to select prime line or last line used,
–or–
•
dial 1–4 to select line group,
dial number (up to 16 digits long—include S and # if
•
needed),
NOTE: You may need a pause between numbers to compensate for dif-
ferences in response time between your system and the host sys-
tem (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host
system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
•
press T/C to store the number,
•
press next location button and store next number,
•
repeat previous steps until all numbers are stored,
–or–
•
press TALK to end.
NOTE: Storing a new speed dial number at a button location
overwrites an existing speed dial number already stored there.
66