Mesa/Boogie TriAxis Owner's Manual page 29

VALUES OF CHANGE: SUB-ROUTINE (Continued)
Assign a Value. Start with the first parameter that you assigned a controller to, "TRUST US ON THIS ONE". Press either
STEP 2:
the left or right arrowed keys under this parameter. It will start to flash! Now Use the keys under the Program/Channel window to
Decrease or Increase the parameter's maximum modulated VALUE.
COPY
PRESET
STEP 3:
Press the ENTR key one time. The parameter you are assigning a VALUE to will stop flashing momentarily and the
VALUE displayed in the PROGRAM WINDOW will be assigned to this flashing parameter in this PRESET only.
COPY
ENTR
PRESET
PRESS ONCE (read paragraph)
STEP 4:
REPEAT: Do NOT press the SHIFT key again. Each time you assign a "VALUE" make sure that when you press the
ENTR key the parameter display stops flashing momentarily. Always check this!!! Save yourself time. If you are unsure, simply
press the ENTR key again.
STEP 5: EXIT and RETURN to normal "Parameter Routine": After assigning all parameters that you wish to modulate with
a Controller number, a VALUE, you are now ready to EXIT the VALUE SUB-ROUTINE and check your work. Press the EXIT key
one time to Return to the normal Parameter routine. NOTICE FLASHING HAS STOPPED. With an expression pedal connected to a
conversion device, you will now be able to modulate parameters on your first preset. Drive your rig!
COPY
21
ENTR
PRESET
EXIT
PRESS ONCE ONLY
NOTE: If the pedal works backwards, unplug it , back the pedal off and plug it back in...this recalibrates the conversion device and
software interface.
15
PROGRAM/CHANNEL GAIN
PGM
/CH
0
NOTICE that in this example, we pressed the up key and
have choosen the maximum amount of modulation in the
positive direction...when the control pedal is pressed this
parameter would go to a setting of 10
15
PROGRAM/CHANNEL GAIN
PGM
/CH
0
01
PROGRAM/CHANNEL GAIN
PGM
/CH
0
TREBLE MIDDLE
1 2 3 4
TREBLE MIDDLE
1 2 3 4
TREBLE MIDDLE
1 2 3 4
PAGE 25
FLASH
BASS
NOTICE that the display STOPS
flashing while you are holding
5
the program
FLASH
BASS
WATCH FOR MOMENTARY
5
PAUSE OF FLASHING IN THE
DISPLAY WINDOW
FLASH
BASS
5
NOTICE FLASHING
HAS STOPPED.
keys.