Selecting A Zone And Channel - Motorola Astro Digital Saber II User Manual

General Radio Operation

Selecting a Zone and Channel

A zone is a grouping of channels. A channel is a group of radio characteristics
such as transmit/receive frequency pairs. After you turn your radio on, select
the desired zone and channel.
• Zone Selection
1a. Press until the
softkey appears on the display.
(The exact location of softkeys
will vary based upon individual
radio programming
HOME
2. Press directly below
3. The display changes to show the current zone name (flashing) and the
channel name (on steady). In the example shown, "POLICE" = Zone;
"DISP NW" = Channel.
12
1b. Place the Zone Switch (if
programmed, see page 2) to
the desired position. Then go
to step 5a or 5b.
OR
.
HOME
Zone = Flashing
Channel = On Steady