Door Swing Reversal - Whirlpool MULLION EVAPORATOR DESIGN User Manual

DOOR SWING REVERSAL

1. Open the refrigerator door and remove the toe panel at the bottom of the unit.
2. Remove the top hinge. (Fig. 5)
3. Remove the freezer door.
4. Remove the center hinge. (Fig. 5)
5. Remove the refrigerator door.
6. Remove the bottom hinge. (Fig. 5)
7. Lay the freezer door on a flat protected surface and remove the door handle. (Fig. 5)
8. Reinstall the freezer door handle on the opposite side of the door.
9. Lay the refrigerator door on a flat protected surface and remove the door handle. (Fig. 5)
10. Reinstall the refrigerator door handle on the opposite side of the door.
11. Move the bottom hinge to the opposite side of the cabinet and reinstall it.
12. Set the refrigerator door on the bottom hinge and close the door to keep it in place.
13. Reinstall the center hinge.
14. Set the freezer door in the center hinge and close the door to keep it in place.
15. Reinstall the top hinge.
16. To align the refrigerator door:
a) DO NOT ADJUST THE BOTTOM HINGE. Use the bottom hinge as an establishing point.
b) Loosen the center hinge (Figs. 5) and align the refrigerator door with the cabinet edge.
c) Tighten the center hinge.
17. To align the freezer door:
a) If the refrigerator door is properly aligned,
DO NOT ADJUST THE CENTER HINGE.
b) Loosen the top hinge (Fig. 5) and align
the top of the freezer door with the top
of the cabinet.
c) Tighten the top hinge.
MULLION EVAPORATOR DESIGN
Plastic Washer
Center Hinge
Door Stop
Fiber Washer
Handle
Hole Plug
3
Cover
Top Hinge
Shim
Hinge Hole Plug
Hinge Bushing
Plug
Fiber Washer
Door Stop
Bottom
Hinge
Fig. 5
12 cu. ft. Top-Mount
Handle
Handle
Insert