Administration Tab - System - Linksys EFG120 User Manual

Administration Tab - System

From the System screen, shown in Figure 5-8, you will be able to change some
of the EFG120's basic settings as well as some of the more advanced settings.
These settings, broken up into four categories, are explained on the following
pages in detail. While these changes are being made, you can click the Save
button to save these changes, or Cancel to clear all changes. To reset the
EFG120's default settings, click the Restore Default Config button. To get fur-
ther information about anything on this screen, click the Help button.
20
Figure 5-8
IDENTIFICATION
The GigaDrive Name is how the EFG120 is represented
GigaDrive Name
on your network. When you look at the devices on your
network, you will see the EFG120 listed under this name.
Comment The Comment field is optional, but it is a good place to
list additional information about the EFG120, such as its
location on the network, what department it belongs to in
your organization, its default IP Address, etc.
The WorkGroup name specifies under which workgroup
WorkGroup
the EFG120 is listed.
Printer Name If you connect a printer to the EFG120, enter the Printer's
name, how it is identified on your network, in this field.
LOCATION
Language Support Keep this set to the default setting (USA).
Time Zone Set this according to the time zone in which you're locat-
ed.
Local Date Set the correct date here.
Local Time Set the correct time here.
WINS
Enable WINS When using a Windows NT or 2000 network server, you
can enable this function to find network devices by name
over your server. This is more convenient than having to
enter the device's IP Address. To enable the function,
check the box next to Enable WINS.
Enter the IP Address of your WINS network server here.
WINS Server
21