Live Setting - Vista QE04-XXXh Installation And User Manual

Quantum EVO H.264 installation and user manual

Live Setting

Sequence settings
The live settings are used to set up a sequence of either full screen camera images or multi
screen displays
Use the Up and Down arrows to select either: Full Screen, Quad or Nine way split
sequences. The display will change to allow individual sequence times to be set per channel
or split screen option. Use the select key to turn the cell green and then the Up and Down
keys to change the values.
Use the right button to move to "Start" press select, the main monitor out put will display this
sequence.
Alternatively use the mouse to select the sequence required, and then select the duration.
Click "Start" to turn the sequence on.
To interrupt the sequence, simply select any camera.
Event Popup
The Main screen can be set to display events, the options are:
Alarm: if the single alarm input is activated, then any camera that has the alarm function
turned on will be sequenced
Motion: Any camera with motion will be displayed, multiple motion cameras will be
sequenced
Alarm + Motion: this will display both alarm and motion cameras
OFF: No action taken
APPLY: In order to save any modified setting value, press "SEL" key when the "APPLY" section
.
is highlighted. This action can be carried out within each Sub Menu
27