Recording A Cd Or Dvd; Using The Single-Touch And Multi-Touch Feature - Lenovo ThinkCentre E93z User Manual

1. With the computer on, press the Eject/Load button. When the tray slides out automatically, carefully
remove the disc.
2. Close the tray by pressing the Eject/Load button or by gently pushing the tray forward.
Note: If the tray does not slide out of the drive when you press the Eject/Load button, insert a straightened
paper clip into the emergency-eject hole located on the front of the DVD drive. Be sure the drive is powered
off when using the emergency eject. Use the Eject/Load button instead of the emergency eject except
in an emergency.

Recording a CD or DVD

If your computer comes with a recordable DVD drive, you can use the drive to record CDs or DVDs.
To record a CD or DVD, do one of the following:
• On the Windows 7 operating system, you have either the Corel DVD MovieFactory Lenovo Edition program
or the Power2Go program installed on your computer.
– To run the Corel DVD MovieFactory Lenovo Edition program, click Start ➙ All Programs ➙ Corel
DVD MovieFactory Lenovo Edition ➙ Corel DVD MovieFactory Lenovo Edition. Follow the
instructions on the screen.
– To run the Power2Go program, click Start ➙ All Programs ➙ PowerDVD Create ➙ Power2Go.
Follow the instructions on the screen.
• On the Windows 8 operating system, run the Power2Go program by doing the following:
1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms. Then
click Search and type Power2Go.
2. Click Power2Go in the left panel to open the program.
3. Follow the instructions on the screen.
• On the Windows 8.1 operating system, run the Power2Go program by doing the following:
1. On the start screen, click the arrow icon
type Power2Go in the search box in the top-right corner of the screen.
2. Click Power2Go in the search result to open the program.
3. Follow the instructions on the screen.
You also can use Windows Media
and Support" on page 87.

Using the single-touch and multi-touch feature

Note: The single-touch feature or multi-touch feature is only available on some computer models.
Your computer might come with the single-touch feature or multi-touch feature depending on your model.
If the single-touch feature or the multi-touch feature is available on your computer, you can tap the touch
screen once with your finger to make a single click. To make a double-click, tap twice without pausing.
To make a right-click, tap the touch screen once and then hold your finger on the touch screen until a
round circle is displayed. Then, lift your finger off the touch screen. A context menu will be displayed,
where you can make selections.
Using the single-touch feature
The single-touch feature enables you to use only one finger at a time to interact with your computer.
24
ThinkCentre E93z User Guide
in the bottom-left corner to go to the Apps screen. Then
®
Player to record CDs and data DVDs. For more information, see "Help