Table Of Program Names For Each Input Format - Yamaha AVX-S80 Owner's Manual

I Table of Program Names for Each Input Format
This system automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Input
No. Program
DOLBY DIGITAL, DTS
MOVIE
7
THEATER 1
8
MOVIE
THEATER 2
9
DOLBY
DIGITAL
DTS DIGITAL
SUR
PRO LOGIC
PRO LOGIC II
* Only when the Matrix 6.1 decoder is ON.
y
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6.1 button on
the remote control, the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder usually turns on and the corresponding DSP
program is selected.
• MATRIX 6.1 on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center
speaker. In this case the program name changes to the corresponding name for 6.1 channel.
• When playing a 6.1 channel source with MATRIX 6.1 on the remote control turned off, the program name changes to the
corresponding name for 5.1 channel.
2 channel
DOLBY DIGITAL
ANALOG, PCM,
70 mm Spectacle DGTL Spectacle
70 mm Sci-Fi DGTL Sci-Fi
70 mm Adventure DGTL Adventure
70 mm General DGTL General
— Normal
— Enhanced
—
—
Normal
Enhanced
Movie
Music
5.1 channel
DTS
DTS Spectacle
DTS Sci-Fi
DTS Adventure
DTS General
—
—
— Normal
— Enhanced
— —
— —
— —
— —
BASIC PLAYBACK
6.1 channel *
DOLBY DIGITAL DTS
+ Matrix 6.1 + Matrix 6.1
Spectacle 6.1 Spectacle 6.1
Sci-Fi 6.1 Sci-Fi 6.1
Adventure 6.1 Adventure 6.1
General 6.1 General 6.1
Matrix 6.1 —
Enhanced 6.1 —
— Matrix 6.1
— Enhanced 6.1
— —
— —
— —
— —
23