APPENDIX G – Printer Selftest Pages
The following three functions allow you to print out information about your printing system configuration. These
pages can be selected via printer panel (Item: INFORMATION MENU).
Note:
The information for the configuration page are recorded at power-up time. There is no update of the changes
after power-up.
Configuration Page
This page will be printed via printer panel (INFORMATION MENU - PRINT CONFIGURATION).
Of particular interest are the indications under Paper Trays and Options where you can see:
Paper Trays and Options
- PH Controller (Revision) PHC
- Device 1:
Menu Map
(Sample page on page 28)
The Menu Map page can be selected
This page is showing the different paper sources and its allocated Media Types.
PAPER HANDLING MENU
Event Log Page
(Sample page on page 29)
Via printer panel (INFORMATION MENU - PRINT EVENT LOG) you can print the Event Log Page showing the last
50 system errors including an error code for identification. Very helpful for diagnosing purposes!
TowerFeed error codes:
Note:
Whenever calling for service, please make sure to have these information pages at hand.
IU 660 / 0047
(Sample page on page 27)
Rutishauser TOWERFEED 444 option with configuration,
Firmware Revision of Option PCB/Logic PCB,
installed trays [size code*] and tray capacity
*[size codes]: A4=6, A3=4, US Letter=7 , US Legal=3, US Ledger=5
via printer panel (INFORMATION MENU - PRINT MENU MAP).
showing paper sources (trays) with the allocated Media Types, e.g.
Tray 4 TYPE = LETTERHEAD
13.1x.3n
13.1x.2n
x = Device numer
n = TowerFeed tray number (not printer tray)
TowerFeed Paper Jam
TowerFeed Motor blocked
TM
26
TowerFeed
for the HP LaserJet 8150/8100/8000