Connecting The Ac Adapter To The Port Replicator - Fujitsu LIFEBOOK U904 Operating Manual

Connecting the AC adapter to the Port Replicator

3
1
Power outlets will vary from country to country, see chapter
travelling in other countries ", Page
When the notebook is connected to a port replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded as
soon as the notebook is connected to a Port Replicator of the same type.
Fujitsu
► Connect the AC cable to the AC adapter (1).
► Plug the AC cable into the power outlet (2).
► Connect the AC adapter cable to the DC
jack (DC IN) of the Port Replicator (3).
2
13.
Working with the notebook
"When
43