SOYO SY-7ISA plus Owner's Manual page 83

BIOS Setup Utility
3-7.1 PNP/PCI Configuration Controls
PNP/PCI
Controls
Reset
Configuration
Data
Resources
Controlled By
If [Resources Controlled By] is set to [Manual]
IRQ-# and
DMA-#
assigned to:
Under this item the user can assign an IRQ to a PCI slot. However, there under
some conditions the IRQ will not be assigned as selected under this item:
1. IRQs 0, 1, 2, 6, 8, 13 can NOT be assigned, because they are fixed.
2. IRQs 5, 9, 10, 11 are available
3. IRQs 3,4,7,12,14 and 15 will only be assigned if they are free. See the table
below on how to free them:
Setting Description
Disabled Retain PnP configuration
data in BIOS.
Enabled Reset PnP configuration data
in BIOS.
Manual BIOS does not manage PCI/ISA PnP
card IRQ assignment.
Requires to assign IRQ-# and DMA-# to PCI or
ISA PnP manually.
IRQ-3,4,5,7,9,10,11,12,14,15 assigned to: _
DMA-0,1,3,5,6,7 assigned to: _
Auto The Plug-and-Play BIOS
(ESCO) auto manages PCI/ISA PnP
card IRQ assignment
automatically.
PCI/ISA PnP Choose IRQ-# and
DMA-# assigned to
PCI/ISA PnP card.
Legacy ISA Choose IRQ-# and
DMA-# assigned to
Legacy ISA card.
79
SY-7ISA+
Note
Default
Recommended
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7