SOYO SY-7ISA plus Owner's Manual page 62

BIOS Setup Utility
Frequency/ Voltage Control (Continued)
Setting
Disabled
Spread
Spectrum
Enabled
3-1.4 C.I.H. 4-WAY Protection Settings
Setting
Disabled
C.I.H. 4-
WAY
Enabled
Protection
3-1.5 Onboard Codec Control Setting
Onboard
codec control Enabled
3-1.6 Quick Power On Self Test
Quick Power
On Self Test
3-1.7 System Memory Control Setting
System Memory
Control Setting
System Memory
Frequency
SDRAM CAS
Latency Time
SDRAM Cycle
Time Tras/Trc
This item allows you to enable/disable
the spread spectrum modulate
When set to enabled, the BIOS can
only be programmed through
AWDFLASH, making sure that any
virus is unable to program the system
BIOS. Set to disable the BIOS can be
programmed the traditional way.
Setting
Disabled If you want to use a 6 channel
CNR card or PCI sound card, set
this item to disabled.
Setting
Disabled
Enabled Provides a fast POTS at boot-up.
Setting Description
Auto Set this item to auto for automatic
detection of the system memory
100
frequency. For a fixed frequency set
133
to 100 or 133MHz.
3
Use the default setting
2
7/9
Use the default setting
5/7
Description
Description
Description
Description
58
SY-7ISA+
Note
Default
.
t.
Note
Default
Note
Default
Note
Default
Note
Default
Default
Default