Cd5 Xs Intr Od Ucti O N A Nd Ins Ta Lla Tion - NAIM CD5s Owner's Manual

C D5 XS

10 CD5 XS Intr od ucti o n a nd Ins ta lla tion

The CD5 XS CD Player can be operated either from its internal power supply only or, for
improved performance, with an additional external Naim Flatcap or Hi-Cap power supply.
Connection of the power supply is illustrated in Diagram 14.2. CD player control and
operation is described in Sections 16, 17 and 18.
The CD5 XS should be installed on a dedicated equipment stand intended for the
purpose. Do not stand the player directly on top of another item of Naim Audio
equipment. Care should be taken to ensure that the player is level.
The CD5 XS is fitted with both analogue and S/PDIF digital output options selectable using
a rear panel switch.
A transit screw on the underside of the CD5 XS case should be removed before use and
must be replaced if the unit is to be re-packed and shipped. This transit screw must not
be used in any other Naim product. Do not invert the player once the transit screw is
removed.
The player (and external power supply if used) should be installed in its final location
before connecting cables or switching on. Ensure that power amplifiers are switched off
and the preamplifier volume is turned down before the player (or external power supply)
is switched on. The player power button is located on the rear panel. The Flatcap power
supply power button is located on its rear panel. The Hi-Cap power supply power button is
located on its front panel.
11 CD5 XS C onnectio ns
11 . 1 Rear P a nel
Power
Mains Remote
switch input and
fuse
E8
RS232 interface
Digital/analogue
S/PDIF digital
output switch
in out
Note: The power supply link plug should be fitted unless an
external upgrade power supply is in use.
Note: RCA phono and DIN output sockets should not be
connected simultaneously.
Note: The Remote input socket is intended to accept
external control signals for multi-room applications.
Contact your dealer or Naim Audio directly for further
information.
Note: The optional RS232 interface can provide external
control of the player in custom installations. Contact your
dealer or Naim Audio directly for further information.
Power supply link plug
and upgrade sockets
(link plug fitted) output left
DIN output
RCA RCA
phono phono
output right
CD5 XS
DIN Output
ch1 nc
ch2 nc
-ve