Wire Your System; Dual Mode - Crown CDi 6000 Operation Manual

2 Setup
(continued)

2.6 Wire Your System

2.6.1 Dual Mode

Typical input and output wiring is shown in Figure 2.5.
INPUTS: Connect input wiring for both channels.
OUTPUTS: Maintain proper polarity (+/–) on output
connectors.
Connect Channel 1 loudspeaker's positive (+) lead to
Channel 1 positive (+) terminal of amp; repeat for negative
(–). Repeat Channel 2 wiring as for Channel 1.
page 8
Channel 2
Figure 2.5 System Wiring,
Dual Mode
Channel 1
Channel 2 Channel 1
CDi Series Power Amplifiers
Operation Manual