Ivr Configuration Menu - Cisco ATA 190 Administration Manual

Voice Menu Codes
This section contains information on accessing the Interactive Voice Response (IVR) and a
quick-reference list of the voice configuration menu options for the ATA 190.
Accessing the IVR and Configuring Your Phone Setting
To access the IVR and configure your phone settings, follow these steps:
You can change the PIN on the Cisco Unified CM User Options web page.
Note
Procedure
To access the IVR, go off-hook on the phone connected to Line 1 and press ****.
Step 1
The IVR prompts for a password.
The ATA 190 allows you to enter only numerical values for password.
Note
Enter the PIN by pressing the number keypad, followed by # button.
Step 2
You are at the IVR main configuration menu.
Follow the voice prompts on the IVR. See
Step 3
To return to the main configuration menu, press #.
Step 4
To exit the IVR, end the call.
Step 5
Table B-1
Table B-1
Action
Show IP address
Configure IP address
Show subnet mask
OL-31821-01
describes the various options in the IVR Configuration Menu
Navigating the IVR Configuration Menu
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
C H A P T E R
Table B-1 for information on navigating the IVR.
IVR Code Navigating Notes
110
111 Availaible in static ip mode only
120
B
B-1