HP StorageWorks 400r Quickspecs page 16

QuickSpecs
Product Configuration Wizard
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510F adapter.
Storage Controllers HP Smart Array E500/256MB Controller
HP Internal SAS/SATA 4-Port Cable
NOTE: The purchase of a SAS Storage Controller requires the purchase of HP
SAS/SATA 4-Port Cable.
Storage HBAs SAS HBAs
HP SC44Ge Host Bus Adapter
NOTE: Please see the HBA QuickSpecs for additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html
(SC44Ge HBA)
SCSI HBAs
HP SC11Xe Host Bus Adapter (PCI-e)
HP U320e SCSI Host Bus Adapter
NOTE: Please see the following QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
Step 3 - Add optional software
Data Protector Express extensions
NOTE: HP All-in-One Storage Systems ship with the HP StorageWorks Data Protector Express Backup server LTU. No functional
extensions are required to backup file or iSCSI block data but the following extensions can be added for advanced functionality.
(NOTE: This is the backup server LTU component of Data Protector Express and does not include any add-on licenses for features
such as Bare Metal Recovery or Disk-to-Disk-to-Any functionality)
Additional extensions are available if you are enabling network backup from clients or servers to the AiO as a backup target. For
more information on HP Data Protector Express please visit: http://www.hp.com/go/dataprotectorexpress.
HP StorageWorks Data Protector Express D2D2Any LTU
HP StorageWorks Data Protector Express Drive Expansion (1 incremental drive) LTU
Storage Mirroring replication software
HP StorageWorks Storage Mirroring software enables remote replication over an IP LAN/WAN between multiple All-in-One
Storage Systems for both file (NAS) and block (iSCSI) data. Key features include asynchronous replication that can be scheduled to
a fine granular level, Logical Unit Number (LUN), file or byte level. Other features include multiple replication configuration options
including peer-to-peer and many-to-one. In addition, Storage Mirroring is a very cost effective disaster recovery alternative from one
host to another within a LAN, storage center, or between direct attached storage in metro offices and regional centers. Additional
configurations allow replication from small office environments to ensure business continuity without an outside IT staff.
Step 4 - Add external storage enclosure for additional capacity (AiO400r only)
NOTE: The HP All-in-One Storage Manager (ASM) software supports management of both internal storage on the All-in-One
Storage System as well as direct attached MSA storage enclosures. ASM also supports management of tiered storage environments
where both SCSI/SAS or SATA hard drives are attached to the All-in-One Storage System.
External storage enclosure support matrix for HP All-in-One Storage Systems
System Enclosure
AiO400r MSA60
MSA50, MSA70
NOTE: For more information on storage enclosures from HP, including product QuickSpecs, please visit:
http://h18006.www1.hp.com/storage/disk_storage/msa_diskarrays/drive_enclosures/index.html
DA - 12913
HP StorageWorks 400t and 400r All-in-One
Physical Max /
Recommended Max
4 (1+3 cascade) / 1
2 (1+1 cascade)/ 1
Worldwide QuickSpecs — Version 1 — 2.11.2008
Storage Systems
414126-B21
435129-B21
457692-B21
416096-B21
412911-B21
AH627A
BB130AA
BB133AA
T5446A
Host Controller or Adapter
SmartArray E500
SmartArray E500
Page 16