Replacing the WiFi units involves the following operations:
•
"Removing the WiFi adapter card" on page 67
•
"Removing the WiFi card module" on page 67
•
"Installing the WiFi units" on page 69
Removing the WiFi adapter card
To remove the WiFi adapter card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 35.
3. Remove the screw that secures the WiFi adapter card.
4. Grasp the WiFi adapter card that is installed and gently pull it out of the slot.
Figure 50. Removing the WiFi adapter card
Note: The card fits tightly into the card slot. If necessary, alternate moving each side of the card a
small amount until it is removed from the card slot.
Removing the WiFi card module
To remove the WiFi card module, do the following:
.
Chapter 5
Installing or replacing hardware
67