Lenovo 10AU User Manual page 50

This section provides instructions on how to access the system board components and drives.
To access the system board components and drives, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 35.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 36.
4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
Figure 12. Pivoting the drive bay assembly upward
5. To lower the drive bay assembly, press the drive bay assembly clip
assembly downward as shown.
Figure 13. Lowering the drive bay assembly
38
ThinkCentre E73 User Guide
1 inward and pivot the drive bay