Owner's Guide
Configuration switches
The configuration switches are on the back of the
thermostat. The factory settings are indicated by the
gray cells in the following table.
1 Keypad lock
2 Cycle length
3 Temperature display format
a.
The settings are locked. The temperature adjustment buttons only
allow you to view the temperature setpoint.
b.
Select short cycles (15 seconds) in most cases as it provides
better temperature control. However, you must select long cycles
(5 minutes) if you have a fan-forced heater.
long cycles are selected.
Switches
a
b
6
Off
On
Short
Long
°C
°F
is displayed when