ProgrammNg Channel Tag (Group Memory Channel Only); Channel Tag LSt; N Channel Tag List - Icom IC-A210E Instruction Manual

3
MEMORY OPERATION
n Programming channel tag
(Group memory channel only)
The tag name can be set a three character name n addton
to the group number. It s convenent for separatng memory
type.
q Push [RCL], then rotate [O-DIAL] to select the desred
group memory channel n the memory mode.
• Rotate [O-DIAL] to select the memory channel type f neces-
sary.
w Push [MEM], then rotate [O-DIAL] to select "CH TAG"
when selectng "LABEL" n "Group memory channel ds-
play" of the menu mode (p. 22).
e Push [MEM], then rotate [DIAL] to select the desred
channel tag.
• The tag type as shown below s selectable.
r Push [MEM] to set the channel tag.
• Selectable tags
___ / TWR / GND / ATS / ATF / APP / ARR / AWS / CLR /
CTF / DEP / FSS / RFS / UNI / MF / OTH / U-1 / U-2
16
RX
GRP01
122.00
127.00
5
CH01 TWR

n Channel tag list

DISPLAY
TAG
NAME
Group* 1 GPS* 2
_ _ _ YES –
TWR YES YES
GND YES YES
ATS YES YES
ATF YES YES
APP YES YES
ARR YES YES
AWS YES YES
CLR YES YES
CTF YES YES Common Traffic Advsory Frequency
DEP YES YES
FSS YES YES
RFS YES YES
UNI YES YES
MF YES YES
OTH YES –
U-1 YES – User1 settng (Refer to page 24)
U-2 YES – User2 settng (Refer to page 24)
* 1 Group memory, * 2 GPS memory
MEANS
Non-tag
Tower
Ground
ATIS
Ar traffic
Approach
Arrval
Automatc Weather Staton
Clearance / Delvery
Departure Frequency
Flght Servce Staton
Remote Flght Servce Staton
Uncom frequency
Mandatory frequency
Other