Working with the notebook
4G Activation for VZW and AT&T
To activate 4G on your Verizon Wireless (VZW) or AT&T device, perform the following steps:
Follow the instructions supplied by the provider of the SIM card.
The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.
► Obtain a UCCID (SIM card): Contact your carrier and request a 2FF/MiniSIM UCCID (SIM card).
•
AT&T: Call 1-800-908-9403 or contact your account representative
•
Verizon Wireless: Call 1-800-256-4646 or contact your account representative
► Insert the SIM card, see chapter
► Activate your wireless device:
Before using your wireless device, you need to contact your respective carriers to activate
Mobile Broadband service. You will need to have your Mobile Equipment Identifier
(MEID) number or IMEI (International Mobile Equipment Identity) readily available in
order to activate your account. To find your MEID or IMEI number:
a. Click on the AirCard Watcher icon on your desktop.
b. Click on the small Menu icon in the taskbar at the top of the AirCard
Watcher window (it's the fourth from the right).
c. Select "About...", then click Device in the left pane. The MEID and IMEI numbers will be
displayed in the right pane. The IMEI number can also be found on the label on the unit box.
► Contact your carrier to activate the account:
AT&T: Call 1-800-908-9403 or contact your account representative
Verizon Wireless: Call 1-800-256-4646 or contact your account representative
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, see "Appendix: Miscellaneous Information".
Access via Wireless WAN
You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer.
If you have ordered a Wireless WAN module, your device will already
be prepared when you receive it.
You will find information on establishing the connection with the Wireless WAN
network in the documentation for the hardware you plan to use.
46
"Inserting the SIM card", Page
43.
Fujitsu