Optional Wireless Lan / Bluetooth / 4G Wireless Components; Switching The Wireless Components On And Off; Configuring Wlan Access; Further Information On Wlan And Bluetooth - Fujitsu lifebook t935 Operating Manual

Working with the notebook
Optional wireless LAN / Bluetooth / 4G
wireless components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on the system configuration ordered, your system will be equipped
with wireless LAN, Bluetooth and / or 4G.

Switching the wireless components on and off

► Press the key combination
WirelessLAN Bluetooth Bluetooth WirelessLAN
The wireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth 4G modules and the wireless LAN transmission unit (antenna) will
all be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with wireless
components provided in the "Safety" manual.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can obtain more information on 4G from your service provider.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter
56
Fn + F5 to start the WirelessSelector.
"WLAN specifications", Page 90.
Fujitsu